Every Motorist Must Learn Skill of Tyres Change

tyres

As you might have guessed from the name, this article depicts how you can change your car tyres without any mistake efficiently. If you are not one of those, who don’t drive, you may feel that you need not master the skill of changing your car tyres and passing the burden to the mechanic. Moreover, if your partner is a regular car driver, you think it is his or her responsibility. However, anyone can face a tyre puncture situation irrespective of whether you are driving or someone else is. You can even face such situations while going on a long journey with your family or friends. Thus, you must know how to change car tyres on your own. 

It is not that tough to change the Car Tyres as it is assumed to be. It doesn’t need any strength of a bodybuilder to change the tyres. This skill is learnt and can be acquired by anyone.  

This step-by-step guide enables you to change your car tyre on your own without any difficulty: 

Steps for Changing Tyres 

Step 1: Find A Safe Place 

When you face a flat tyre suddenly in the mid of your journey, you must not swerve the car suddenly to the side as it can be risky both for you and other vehicles on the road. You must, thus, trace a safe place and then get down the car to change the tyre. You must park the car with enough space between the road and your car. 

Step 2: The Parking Lights must be switched On 

You need to alert the other vehicles on the road by switching the hazard and parking lights on. The blinking lights can be noticed from a distance, and the tyre can be changed safely. 

Step 3: Engage the Hand-break while Parking 

You must pull the hand-brake to the high position for parking the car. This ensures that the car stays at a locked position while force is being applied for changing the tyres. 

Step 4: The Wheel Wedges must be secured 

For additional safety, the wheel wedges must be secured behind the tyres in good condition. This proves to be helpful on the inclined or hilly roads. 

Step 5: Wheel Covers must be removed 

Wheel covers are used to cover the majority of tyres. Thus, before changing the punctured tyres, you need to remove these covers. To have an idea about what you must do to remove these, you need to refer to the owner’s manual. You must know that the wheels cover settings differ for different models. 

Step 6: The Lug Nuts are loosened halfway

Before lifting the vehicle with a jack, you must loosen the lug nuts halfway. This is because the tyres would keep on rotating if you first lift the car. The lug nuts can be loosened using a lug wrench. You must ensure that the wrench’s side of the correct size is used.

Step 7: Use Wooden Boards to Secure the Jack

The jacking point must be located under your car. You must connect the jack to the car at this point. The jack must be kept on after placing the wooden boards under the jacking point. Next, until you trace a gap between the tyre and the ground, you need to lift the car after connecting the jack.

Step 8: Complete removal of the Lug Nuts

The lug nuts must be removed after unscrewing them completely using a wrench.

Step 9: Replacement of the Punctured Tyres

The flat tyre must be removed from the frame and replaced by a spare tyre.

Step 10: Wheel Cover Replaced after Screwing Lug Nuts

Tyre replacement has this as its last step. The lug nuts are screwed halfway and the vehicle is lowered then. When the tyre makes contact with the ground, the wooden board and the jack must be removed. Now, the lug nuts are screwed tightly and the wheel cover is replaced.

Now keep the tools used back in the car, check the tyre pressure after the car tyres fitted near me and start driving. If you don’t have the tyre pressure checking equipment, you must visit the nearest garage to get the tyre pressure checked. You must repair the flat tyres without any delay.

Expert bonus Tips for Changing Tyres

These bonus tips would be helpful while changing car tyres:

Safety

For additional warning, a triangle reflector must be placed at a few feet distance from the car to make the passing vehicles alert.

Lug Nuts Tightening

Your feet can be used to check the tightness of the lug nut so that you can drive safely.  This way, the nuts get screwed in position and extra force is added to the wrench.

Spare Tyre

It is obvious that motorists often neglect the spare tyres unless they experience sudden tyre puncture. Thus, you must always consider that there are five tyres in your car rather than four. This way, you won’t neglect your spare tyre and maintain it regularly.

Jack Placement

four jack points are present in every modern vehicle found near each wheel. For the jack, they have indentations, notches, or holes usually. These are present in the vehicle for a perfect fit. 

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top